0

REF: PAGE_7578

LEGO Technic Lamborghini Sian FKP 37 (42115): Chris Haydock Build

Completed LEGO Technic Lamborghini Sián FKP 37 42115 built by a Brick Club member
Member Build

Chris Haydock’s Lamborghini Sian FKP 37

Chris sent over progress photos while he was mid-build, which I always like to see. The 42115 is one of the bigger kits in the library, 3,696 pieces, and it earns its Expert rating. The V12 sub-assembly alone takes a fair amount of time before the bodywork even starts going on.

This post covers both the in-progress shots Chris shared and the completed model. The scissor doors are the standout feature on this kit, and they work properly, opening at the correct angle. The rear engine cover lifts off to show the full V12 layout underneath.

Set number42115
Pieces3,696
Build time7-8 hours
DifficultyExpert
Scale1:8
Released2020
Pieces3,696
Scale1:8
Build time7-8 hrs
Year2020
DifficultyExpert
Chris Haydock LEGO Technic Lamborghini Sian 42115 mid-build, chassis and V12 sub-assembly
Mid-build: chassis, suspension and V12 sub-assembly taking shape
42115 LEGO Technic Lamborghini Sian FKP 37 42115
Kit specs
Full nameLamborghini Sian FKP 37
Set42115
Pieces3,696
Scale1:8
EngineV12 with moving pistons
DoorsScissor (functional)
SteeringWorking (from the steering wheel)
SuspensionFront and rear
ColourLime green, gold rims
Bare chassis of Chris Haydock's LEGO Technic Lamborghini Sian 42115 on a wooden table, the V12 and rear suspension at one end, the gearbox in the middle and the flat front frame with its bare hub at the far end
The same chassis from the other side: engine and rear springs nearest the camera, gearbox in the middle, front frame at the far end

The Sian is the hybrid V12 supercar Lamborghini unveiled at Frankfurt in 2019, the first Lamborghini with a hybrid drivetrain. LEGO made it the third car in its 1:8 Technic Ultimate series in 2020, and it shows in the piece count. The V12 engine has moving pistons under a rear cover that lifts off, there is an eight-speed gearbox worked by paddles behind the steering wheel, the scissor doors open at the correct angle, and the front and rear suspension work. That is a lot packed into the box for 3,696 pieces.

Chris built this mid-subscription and was kind enough to photograph it as it went together, so you can see the chassis and drivetrain before the lime green bodywork goes on. That is where most of the interesting engineering is: the suspension geometry, the V12 sub-assembly, the steering column running to the front wheels.

Build photos
Doors open detail, Chris Haydock LEGO Technic Lamborghini Sian 42115
Doors open, cockpit detail
On the build

The V12 sub-assembly is where most of the time goes on this kit. It is worth taking it slowly because the engine goes in before much of the rear bodywork, and access gets tight once the rear panels are on. Chris photographed it at exactly the right stage, before the bodywork goes on and the interesting stuff disappears inside.

Want to build this?

Chris’s photos are exactly why I like putting member builds on the blog. You get the clean finished model, but you also get the in-between stages where the chassis and mechanisms are still visible. That is the part Technic fans usually want to see.

If you have photos from a Brick Club build, send them over. Finished shots are great, but progress shots are often even more useful.

Brick Club

Rent the Lamborghini Sian FKP 37

The 42115 is in the library, so it could be one of the kits that comes to you. Free postage both ways.

Technic FanUp to 6 kits a year
Master BuilderUp to 12 kits a year
Rent this kit View plans